I mentioned in an earlier post that I was intending to go to the bottom of certain rumors about Panasonic including lens defect correction data in the EXIF information of RW2 files. A number of commercial photo software programs are known to manipulate the RAW image data to remove geometry distortion, chromatic aberration and vignetting silently, which lead to enthusiastic reviews posted on certain digital photography sites about the quality of the Lumix G1 kit lens. However, I know from developing my RAW files with ufraw and digikam that the kit lense has a significant barrel distortion at short focal lengths.
One way to automatically correct those distortions is collecting correction data in a database like PTLens and Lensfun. The photo software knows what corrections to apply to images taken by a certain camera with a certain lens at a certain focal length. That approach however requires significant effort for maintaining the database plus you will always be playing catch up with the camera manufacturer developing new lenses. Not an issue for independent open source efforts, we've been running after information from vendors ever since, but not a good situation for the camera vendor. Unless he runs after the software companies to update their databases whenever he releases a new lens, images developed from his cameras RAW files will be not optimal. I would not want that, especially not if I wanted to reduce development cost and retail price for new products.
Panasonic most likely went the second way, which is having software makers implement the same correction algorithms they use in their cameras and embedding the necessary correction parameters inside the photos meta data. Doing it that way allows for lesser synchronization effort between Panasonic and software vendors and faster time to market. With some effort it might be possible to use this correction data also in open source software.
That being said, there's now a couple of tasks to be done until the correction data can be used:
- find out what information is stored, and where
- reverse engineer the format of the correction parameters
- understand how it's applied to image data
- proof of concept implementation
I believe I've made some progress today on 1.), finding out what information is stored and where. I inspected some of my RW2 files to see what Exif tags they contain and found a couple of tags that are not decoded by exiftool or exiv2. They just contain some data bytes in unspecified format. I noticed that they seem to vary from file to file and decided to find out if I could reproduce the values.
Reverse engineering is a black box approach. In our case the camera is the black box, inputs are the controls like aperture, focal length, exposure program etc, output are the generated RW2 files. You cannot observe the inner workings of the black box other than by observing differences in the output when making modifications to the input. It definitely helps if you can make an educated guess about the inner workings of the black box. For geometry correction, I know a bit about how its corrected, so that is my first target.
I know that geometry distortion depends on the focal length, so I made a couple of shots with the kit lens at 14mm and 45mm, two at each. Then I looked at the Exif data and found one tag, "Exif.PanasonicRaw.0x0119", where the data did not change for images taken at 14mm, but changed significantly when going to 45mm.
84 236 201 47 38 0 0 0 43 1 0 0 141 1 1 0 208 14 238 1 86 2 2 252 196 9 226 3 228 72 36 134
152 94 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 86 2 0 0 196 9 0 0 35 234 24 155
Looking at the data, you see something interesting - a lot of Zeros appearing at 45mm. Nothing changes from 45mm to 35mm, which looks like this:
161 54 43 194 51 0 0 0 0 0 0 0 0 0 1 0 42 0 1 0 86 2 1 0 196 9 245 1 176 16 17 65
Still a lot of Zeros, but lesser. What does this tell us? Now, I know that the geometry of the lens is almost perfect at 45mm, so I expect that there is less correction necessary. It's reasonable to assume that some parameters of the correction formula will become very small, or zero. The data in the Exif tag apparently follows our expectations. I also assume that the data is not encrypted.
The next task is now to find out how the data is formatted. Most likely these parameters are rational numbers. What I don't know yet is the representation. Is it 16, 32 or 64 bit per coefficient? Am I looking at fixed or floating point numbers, little or big endian? Does this tag only contain correction parameters for geometry, or also for chromatic aberration? The tag contains 32 bytes, so it's either 16, 8, or 4 coefficients. I'll have to do some research on geometry correction, maybe Panasonic uses something that is public domain.
It looks like a prominent method of correcting lens geometry is based on Zernike polynomials. The PanoTools lens model uses polynomials as well. One property of polynomials is that you can use as many parameters as you like, it just depends on the order of the polynomial. It's merely a question of computing power available. I could start with a 2nd or 4th order polynomial like the PanoTools model and try to match the tag information with coefficients computed by Hugin.
8 thoughts on “Dissecting Panasonic RW2 files”
This is very interesting! I hope you are able to decode this information -- it would be incredibly useful.
Not much progress here unfortunately. I still cannot make much sense of the numbers. Well, at least I know that it's not an obvious 32bit or 64bit float.
I'm pretty sure they are stored as 16-bit integers (low byte first). Not sure if they are signed or not, but most likely they are.
I have a Panasonic FZ28. Yesterday i've took RW2 pictures and i realized that i cannot open the pictures with my PC.
First i've tried to open with the ussual programs, then with the Silkypix Devoloper Studio 3.0 (i haven't received the CD with this programs when i bought the camera). So the soft is a free version on the internet: NO RESULT.
I hope that you can show me the way...
unfortunately I'm not very familiar with Windows or Macintosh and the software that is used for photo management on these systems.
I have tried the version of Silkypix that came with my camera, it works with the files created by the G1, but it is very slow on Linux using the "Wine" emulator. But there are also free software options available for Windows:
Recent version of the KDE program "digikam" are also available for Windows and on Linux, which is my preferred OS, it is able to work with RW2. There is also a program called "RawTherapy" which is supposed to be very good and able to work with RW2 files.
There is another program called "ufraw" that people are using on Windows to develop LX3 RW2 files. It works well on Linux and I have used it successfully with my G1. So there's a good chance it will work with FZ28 RW2 photos as well.
I hope these hints are helpful for you.
oh drat ... now I'll need to start learning about how PT lens works to see if I can apply panasonic data to some conversion
Think they include those correction tags in the RW2 for the FZ35 as well? I could send you a couple samples if you're interested.
Raphael Rigo has decoded some of this information: http://syscall.eu/#pana